Approved Products List

Approved Products List

Below is a list of approved products you can use with our stormwater network. If you have any questions please contact us.

Category/Material Standard Comment Application Manufacturer
1 Stormwater Pipe
1.1 Reinforced concrete pipe AS/NZS 4058:2007 Pipe class depends on loading All mains Humes (Licence # 2618)
Hynds (Licence # 2586)
1.1.2 Rubber ring joint Humes (Licence # 2618)
Hynds (Licence # 2586)
1.1.3 Flush jointed pipes Not generally accepted Specific design situations Humes (Licence # 2618)
Hynds (Licence # 2586)
1.1.4 Skid ring joint Not generally accepted Specific design situations Humes (Licence # 2618)
Hynds (Licence # 2586)
1.1.5 Roller compacted pipes AS/NZS 4058:2007 Humes "Titan" (Licence # 2586)
1.2 Spiral-welded steel pipe
Internal linings include concrete only.
NZS 4442:1998 or
AS 1579:2001
Not generally accepted Specific design situations Steel pipe NZ Ltd
1.3 Ductile iron
Class K9/ K12
AS/NZS 2280:2004 & amendments Light cement lined with tyton joints.
External protection with green sleeve
Generally suspended and high structural loading
Not generally used
Specific design situations Humes
1.4 Polypropylene
Twin wall pipe
AS/NZS 5065:2005 Rubber ring joint (Blue Line) Specific design Waters & Farr (Storm Boss)
1.5 uPVC pipes & fittings for gravity applications AS/NZS 1254:2010 Rubber ring
Generally not accepted in carriageways
Lateral connections Iplex (licence # 1697)
Marley (licence # 2365)
Keyplas (licence # 2622)
RX Plastics
1.6 Polyethylene Pipe (PE) for gravity applications
(minimum SN16)
AS/NZS 5056:2005 Pipes shall be butt welded in accordance with the manufacturer's recommendations, & the standard coloured black with inner core colour white/grey or brown.

Electro fusion couplings are not generally accepted.
Specific design situations Iplex (licence # 1697)
Marley (licence # 2365)
RX Plastics
1.7 Novaflo
Nova coil
Strip drain
Specific design use for ground water control. Subsoil drains Humes (Licence # 2618)
Hynds (Licence # 2586)


Category/Material Standard Comment Application Manufacturer
2 Fittings
2.1 PE Fittings AS/NZS 4129: 2008
4130:2009
4131:2010
Dura fuse (licence #SA12420 & 2573)
Iplex/Plasson
Marley- Pushlok (licence #1494)
Plassom (Licence #1494 & 1271)


Category/Material Standard Comment Application Manufacturer
3 Manholes
3.1.1 1050 to 2500 mm ID with precast external bases/internal bases are not generally accepted AS/NZS 4058:2007
NZS 3109:1997
NZS 3114:1987
All manholes are to be installed according to the NPDC standard specification for sanitary sewers and stormwater drains Humes (Licence # 2618)
Hynds (Licence # 2586)
3.1.2 1050 VT manhole base, risers and flat lid. NZ 3109:1997 All manholes are to be installed according to the NPDC standard specifications for sanitary sewers and stormwater drains. Humes
3.1.3 1050 Smart Pit
Polythylene Manhole
ATSM F1759-97
WSA 137-2013
All manholes are to be installed according to the NPDC standard specifications for sanitary sewers and stormwater drains. Specific design situations  Hynds
3.1.4 DN1000 & DN625
Plastic
Manhole/Chambers
 BS EN 13598-2:2010 All manholes are to be installed according to the NPDC standard specifications for sanitary sewers and stormwater drains.  Specific design situations.
Not to exceed depth of 6m
Australasia Moulding
Romold
3.1.5 Concrete lid (flat top) with 550mm and 600mm openings AS/NZS 1260:2009
AS/NZS 4058:2007
In carriageways, driveways, vehicle entrances and in all other areas which could be subject to vehicle loading, Heavy duty type shall be used. In other areas medium duty type may be used 1050mm to 2500mm manholes, if bigger it will be to an engineers design Humes (Licence # 2618)
Hynds (Licence # 2586)
3.2 600mm access chambers for depth not exceeding 1.2m AS/NZS NZS 4058:2007
3109:1997
NZS 3114:1987
All manholes are to be installed according to the NPDC standard specification for sanitary sewers and stormwater drains uPVC & Concrete Humes (Licence # 2618)
Hynds (Licence # 2586)
3.3 Marker pegs M14 specifications Offset from stormwater manholes allowing identification
A Green disc will be attached to the marker peg identifying stormwater
RTL
3.4 Manhole Steps
316 grade stainless steel safety step
AS/NZS 4158:2003
AS/NZS 4020:2005
Stainless Steel steps to be used in installation of all new manholes Humes (Licence # 2618)
Hynds (Licence # 2586)
3.5 Plastic encapsulated stainless steel safety step AS/NZS 1657:1992
AS 4198:1994
Only to be used in cases of safety step replacement inside existing manholes Safety Step Irons (Company Name)
Humes
Hynds
3.6 Cast iron manhole covers and frames:
600mm
BS EN 124:2015 vehicle loading or AS3996-80kn loading

Heavy Duty
Light Duty

Hinged lids only

Humes (Licence # 2618)
Hynds (Licence # 2586)
3.7.1 Ductile iron manhole covers and frames Grade 500.7 ISO 1083
EN124 Class D 400
ISO 9001 QAS
Clear opening 600mm
Non Rock
To be used in urban streets with high volume traffic and all State Highways PAMS
BRIO
3.8 Manhole sealant BM 100 or SM9020 Adheres to adjacent surfaces under sustained compression Sika
Humes (Licence # 2618)
Hynds (Licence # 2586)


Category/Material Standard Comment Application Manufacturer
4 Sumps
4.1 Cast iron sump covers BS EN 124:2015 vehicle loading or AS3996-80kn loading Heavy Duty Humes (Licence # 2618)
Hynds (Licence # 2586)
4.2 Mega pit
Max pit
Designed for HN:HO:72 loading Capture of very high flow storm water Specific design situations Hynds (licence # 2586)
Humes
4.3 600mm concrete chambers AS/NZS 4058:2007
NZS 3109:1997
NZS 3114:1987
Humes (Licence # 2618)
Hynds (Licence # 2586)


Category/Material Standard Comment Application Manufacturer
5 Stormwater management Products
5.1 Ultra drain guard Filter system that fits in a sump
Removes hydro carbons, dirt, sand and other contaminants
Ultra Tech
5.2 Ultra pipe sock Control the flow of sediment and oil when pumping ground water Ultra Tech
5.3 X-Tex Durable long lasting geo-textile and filter media
Absorbs hydro carbons including petroleum, animal and vegetable oils
Ultra Tech
5.4 Ultra spill berm plus Helps contain or divert larger volume spills
Flexible polyurethane construction which is non absorbent and chemical resistant
Ultra Tech
5.5 Ultra drain seals Stops spills from going down the drain.
Flexible polyurethane construction which is non absorbent and chemical resistant
Will seal of most drains
Ultra Tech
5.6 Plastic fish for stormwater sumps Blue plastic fish to be put on SW sumps showing all SW for rain only Eco blue fish


Category/Material Standard Comment Application Manufacturer
6 Fittings
6.1 uPVC AS/NZS 1260:2009 Iplex (licence # 2365)
Marley (licence # P20184)
Keyplas licence # 2622)
6.2 Rubber Sleeves AS/NZS 4326:2008 Pipe clamps to be 316 Stainless Steel Fernco


Category/Material Standard Comment Application Manufacturer
7 Pipe liners
7.1 NUFLOW Trench less Technology Installed by Vid-Pro Nuflow (Vid-Pro)
7.2 AM Liner
Sideliner pipe hardlining
Sideliner structural pipe repair
Trench less Technology Installed by Pipe Technology Pipe Technology


Category/Material Standard Comment Application Manufacturer
8 Inlet/Outlet
8.1 Wing wall AS/NZS 4058:2007
NZS 3109:1997
NZS 3114:1987
Concrete Specific design situations Humes (Licence # 2618)
Hynds (Licence # 2586)
8.2 Scruffy dome Hot dipped galvanised steel Specific design situations


Category/Material Standard Comment Application Manufacturer
9 Seal rings
9.1 Forsheda rubber rings for VT manholesl SS-EN ISO
9001:2000
To be installed with VT manholes. Humes